Eladó németjuhász kutya

What is DoS Attack?

DOS is an attack used to deny legitimate users access to a resource such as accessing a website, network, emails, etc. or making it extremely slow. DoS is the acronym for Denial of Service. This type of attack is usually implemented by hitting the target resource such as a web server with too many requests at the same time. This results in the server failing to respond to all the requests. The effect of this can either be crashing the servers or slowing them down.

Cutting off some business from the internet can lead to significant loss of business or money. The internet and computer networks power a lot of businesses. Some organizations such as payment gateways, e-commerce sites entirely depend on the internet to do business.

In this tutorial, we will introduce you to what denial of service attack is, how it is performed and how you can protect against such attacks.

Topics covered in this tutorial

Types of Dos Attacks

There are two types of Dos attacks namely;

DoS– this type of attack is performed by a single host
Distributed DoS– this type of attack is performed by a number of compromised machines that all target the same victim. It floods the network with data packets.

How DoS attacks work

Let's look at how DoS attacks are performed and the techniques used. We will look at five common types of attacks.

Ping of Death

The ping command is usually used to test the availability of a network resource. It works by sending small data packets to the network resource. The ping of death takes advantage of this and sends data packets above the maximum limit (65,536 bytes) that TCP/IP allows. TCP/IP fragmentation breaks the packets into small chunks that are sent to the server. Since the sent data packages are larger than what the server can handle, the server can freeze, reboot, or crash.

Smurf

This type of attack uses large amounts of Internet Control Message Protocol (ICMP) ping traffic target at an Internet Broadcast Address. The reply IP address is spoofed to that of the intended victim. All the replies are sent to the victim instead of the IP used for the pings. Since a single Internet Broadcast Address can support a maximum of 255 hosts, a smurf attack amplifies a single ping 255 times. The effect of this is slowing down the network to a point where it is impossible to use it.

Buffer overflow

A buffer is a temporal storage location in RAM that is used to hold data so that the CPU can manipulate it before writing it back to the disc. Buffers have a size limit. This type of attack loads the buffer with more data that it can hold. This causes the buffer to overflow and corrupt the data it holds. An example of a buffer overflow is sending emails with file names that have 256 characters.

Teardrop

This type of attack uses larger data packets. TCP/IP breaks them into fragments that are assembled on the receiving host. The attacker manipulates the packets as they are sent so that they overlap each other. This can cause the intended victim to crash as it tries to re-assemble the packets.

SYN attack

SYN is a short form for Synchronize. This type of attack takes advantage of the three-way handshake to establish communication using TCP. SYN attack works by flooding the victim with incomplete SYN messages. This causes the victim machine to allocate memory resources that are never used and deny access to legitimate users.

DoS attack tools

The following are some of the tools that can be used to perform DoS attacks.

Nemesy– this tool can be used to generate random packets. It works on windows. This tool can be downloaded from http://packetstormsecurity.com/files/25599/nemesy13.zip.html . Due to the nature of the program, if you have an antivirus, it will most likely be detected as a virus.
Land and LaTierra– this tool can be used for IP spoofing and opening TCP connections
Blast– this tool can be downloaded from http://www.opencomm.co.uk/products/blast/features.php
Panther- this tool can be used to flood a victim's network with UDP packets.
Botnets– these are multitudes of compromised computers on the Internet that can be used to perform a distributed denial of service attack.

DoS Protection: Prevent an attack

An organization can adopt the following policy to protect itself against Denial of Service attacks.

Attacks such as SYN flooding take advantage of bugs in the operating system. Installing security patches can help reduce the chances of such attacks.
Intrusion detection systems can also be used to identify and even stop illegal activities
Firewalls can be used to stop simple DoS attacks by blocking all traffic coming from an attacker by identifying his IP.
Routers can be configured via the Access Control List to limit access to the network and drop suspected illegal traffic.

Hacking Activity: Ping of Death

We will assume you are using Windows for this exercise. We will also assume that you have at least two computers that are on the same network. DOS attacks are illegal on networks that you are not authorized to do so. This is why you will need to setup your own network for this exercise.

Open the command prompt on the target computer

Enter the command ipconfig. You will get results similar to the ones shown below

For this example, we are using Mobile Broadband connection details. Take note of the IP address. Note: for this example to be more effective, and you must use a LAN network.

Switch to the computer that you want to use for the attack and open the command prompt

We will ping our victim computer with infinite data packets of 65500

Enter the following command

ping 10.128.131.108 –t |65500

HERE,

"ping" sends the data packets to the victim
"10.128.131.108" is the IP address of the victim
"-t" means the data packets should be sent until the program is stopped
"-l" specifies the data load to be sent to the victim

You will get results similar to the ones shown below

Flooding the target computer with data packets doesn't have much effect on the victim. In order for the attack to be more effective, you should attack the target computer with pings from more than one computer.

The above attack can be used to attacker routers, web servers etc.

If you want to see the effects of the attack on the target computer, you can open the task manager and view the network activities.

Right click on the taskbar
Select start task manager
Click on the network tab
You will get results similar to the following

If the attack is successful, you should be able to see increased network activities.

Hacking Activity: Launch a DOS attack

In this practical scenario, we are going to use Nemesy to generate data packets and flood the target computer, router or server.

As stated above, Nemesy will be detected as an illegal program by your anti-virus. You will have to disable the anti-virus for this exercise.

Download Nemesy from http://packetstormsecurity.com/files/25599/nemesy13.zip.html
Unzip it and run the program Nemesy.exe
You will get the following interface

Enter the target IP address, in this example; we have used the target IP we used in the above example.

HERE,

0 as the number of packets means infinity. You can set it to the desired number if you do not want to send, infinity data packets
The size field specifies the data bytes to be sent and the delay specifies the time interval in milliseconds.

Click on send button

You should be able to see the following results

The title bar will show you the number of packets sent

Click on halt button to stop the program from sending data packets.

You can monitor the task manager of the target computer to see the network activities.

Summary

A denial of service attack's intent is to deny legitimate users access to a resource such as a network, server etc.
There are two types of attacks, denial of service and distributed denial of service.
A denial of service attack can be carried out using SYN Flooding, Ping of Death, Teardrop, Smurf or buffer overflow
Security patches for operating systems, router configuration, firewalls and intrusion detection systems can be used to protect against denial of service attacks.

@EVERYTHING NT

BEST PASSWORD MANAGERS FOR IOS

Here I have streamlined few of the best password managers for iOS including Keeper, OneSafe, Enpass, mSecure, LastPass, RoboForm, SplashID Safe and LoginBox Pro.

1. ONESAFE PASSWORD MANAGER (CROSS-PLATFORM)

OneSafe is one of the best Password Manager apps for iOS devices that lets you store not only your accounts' passwords but also sensitive documents, credit card details, photos, and more.

OneSafe password manager app for iOS encrypts your data behind a master password, with AES-256 encryption — the highest level available on mobile — and Touch ID. There is also an option for additional passwords for given folders.

OneSafe password manager for iOS also offers an in-app browser that supports autofill of logins, so that you don't need to enter your login details every time.

Besides this, OneSafe also provides advanced security for your accounts' passwords with features like auto-lock, intrusion detection, self-destruct mode, decoy safe and double protection.

Download OneSafe Password Manager: iOS | Mac | Android | Windows

2. SPLASHID SAFE PASSWORD MANAGER (CROSS-PLATFORM)

SplashID Safe is one of the oldest and best password management tools for iOS that allows users to securely store their login data and other sensitive information in an encrypted record.

All your information, including website logins, credit card and social security data, photos and file attachments, are protected with 256-bit encryption.

SplashID Safe Password Manager app for iOS also provides web autofill option, meaning you will not have to bother copy-pasting your passwords in login.

The free version of SplashID Safe app comes with basic record storage functionality, though you can opt for premium subscriptions that provide cross-device syncing among other premium features.

Download SplashID Safe Password Manager: Windows and Mac | iOS | Android

3. LOGIN BOX PRO PASSWORD MANAGER

LoginBox Pro is another great password manager app for iOS devices. The app provides a single tap login to any website you visit, making the password manager app as the safest and fastest way to sign in to password-protected internet sites.

LoginBox Password Manager app for iOS combines a password manager as well as a browser.

From the moment you download it, all your login actions, including entering information, tapping buttons, checking boxes, or answering security questions, automatically completes by the login box Password Manager app.

For security, the login box Password Manager app uses hardware-accelerated AES encryption and passcode to encrypt your data and save it on your device itself.

Download LoginBox Password Manager: iOS | Android

Continue reading

"PHoss is a sniffer. A normal sniffer software is designed to find problems in data communication on the network. PHoss is designed to know some protocols which use (or may use) clear text passwords. Many protocols are designed to use secure authentication. For fallback they define a lowest level of authentication using clear text. Many companies use this lowest fallback definition as standard setting to make the product working in many environments." read more...

Download: http://www.phenoelit-us.org/phoss/download.html

More articles

Eladó németjuhász kutya

2020. augusztus 30., vasárnap

DOS (Denial Of Service) Attack Tutorial Ping Of Death ;DDOS

What is DoS Attack?

Topics covered in this tutorial

Types of Dos Attacks

How DoS attacks work

DoS attack tools

DoS Protection: Prevent an attack

Hacking Activity: Ping of Death

Hacking Activity: Launch a DOS attack

Summary

Related articles

BEST PASSWORD MANAGERS FOR IOS

BEST PASSWORD MANAGERS FOR IOS

1. ONESAFE PASSWORD MANAGER (CROSS-PLATFORM)

2. SPLASHID SAFE PASSWORD MANAGER (CROSS-PLATFORM)

3. LOGIN BOX PRO PASSWORD MANAGER

Continue reading

PHoss: A Password Sniffer

Rendszeres olvasók

Blogarchívum

Magamról